Skip to main content
My Badge Studio LogoMy Badge Studio
← All fridge magnet templates

2x3 Inch Fridge Magnet Template (51 × 76mm)

The 2 × 3 inch magnet is the classic souvenir size: big enough for a photo, a name and a date, small enough to fill a fridge door. Design yours online, download a print-ready sheet with nine magnets on A4 or US Letter, print it on magnet paper and cut. No press, no software to install.

2x3 magnet size and sheet layout

Printing on long bond or another paper size? Choose the US Letter layout and print at 100% scale; see printing at actual size if your printer shrinks the page.

How to make 2x3 fridge magnets

  1. Open the template and upload your photos. Each one fills a magnet; drag and zoom to set the crop.
  2. Add names, a date or a short message with the text tools. Use the same design for every magnet or a different photo on each one.
  3. Download the PDF (or print straight from the studio) at 100% scale.
  4. Print on printable magnetic paper, or on photo or sticker paper that you laminate and mount on an adhesive magnet sheet.
  5. Cut along the edges with scissors, a paper trimmer or a cutting machine.

What to print on

What people make with 2x3 magnets

Other sizes: 2 × 2 inch (50 × 50mm) square, 2.5 inch square, 3.5 × 2.5 inch rectangle and the instant-photo magnet, or see every fridge magnet template.

2x3 magnet template FAQ

What size is a 2x3 magnet?

2 × 3 inches is 50.8 × 76.2mm (5.1 × 7.6cm). The template is portrait — 2 inches wide and 3 inches tall. For landscape (3 × 2 inches), swap the width and height in the studio and set 2 columns and 5 rows on the Sheet tab.

How many 2x3 magnets fit on one sheet?

Nine per A4 or US Letter sheet (3 across, 3 down) and twenty-five per A3 sheet. The layout is done for you, with a small gap between magnets for cutting.

What do I print 2x3 fridge magnets on?

Printable magnetic sheets (sold as printable magnetic paper or magnetic photo paper for inkjet printers): the sheet itself is the magnet, so you print and cut. Or print on photo paper or glossy sticker paper, laminate it, and mount it on an adhesive magnet sheet before cutting. Print at 100% scale.

Can I make the magnets landscape (3x2) instead?

Yes. In the studio, swap the width and height to 76.2 × 50.8mm, then on the Sheet tab set 2 columns and 5 rows: ten landscape magnets per A4 sheet.

Do I need a magnet press?

No. These are flat, cut-out magnets: print the sheet and cut along the design edge with scissors, a paper trimmer or a cutting machine. Making press-made magnets with a magnet button machine instead? Use the 50 × 50mm, 63.5mm or 90 × 65mm magnet templates, which include the wrap-around bleed a press needs.

Is the 2x3 magnet template free?

Yes. The free plan includes 3 prints and PDF downloads every month, with a small mybadgestudio.com label on the magnet edge. Any paid plan or a download pack removes the label, and the Business plan makes downloads unlimited.

Start free: no credit card needed.